FLOODLIGHT, 10W, LED, MARINE DUTY, 10-30V DC, 80 DEGREE, E-LED, MAST PRODUCTS (LT00032)
|
|
|
|
|
|
FLOODLIGHT, 10W, LED, MARINE DUTY, 10-30V DC, 80 DEGREE, E-LED, MAST PRODUCTS (LT00032)
|
|
|
|
| |
|
Product Details
|
LT00032
MANUFACTURER: E-LED LIGHTING / MAST PRODUCTS
DESCRIPTION:
FLOODLIGHT 10 WATT LED MARINE DUTY LIGHTING FIXTURE, 10V-24V AC, 10V-30V DC, 50-60HZ, 80 DEGREE BEAM ANGLE, IP67 RATED, 100% COPPER FREE ALUMINUM FIXTURE MATERIAL, DOUBLE POWDER COATED FINISH, GREY FINISH (ALSO AVAILABLE WITH WHITE FINISH), BOROSILICATE HIGH IMPACT TEMPERED GLASS LENS, 10 WATT HIGH POWER CERAMIC LED, SHOCK MOUNTED LED, CIRCUIT BOARD & DRIVER, HIGH PURITY ALUMINUM REFLECTOR, OIL AND SOLVENT RESISTANT HONEYCOMB GASKET, STAINLESS STEEL BRACKET AND HARDWARE, PIGTAIL INCLUDED 6.5 FT. (2 METERS)
EQUIVALENT: 10 WATT HIGH OUTPUT LED = 100 - 150 WATT HALOGEN
SPECIFICATIONS:
LIGHT SOURCE: 1 X 10 WATT HIGH POWER CERAMIC LED (MADE IN USA)
POWER CONSUMPTION: 10 WATT
EFFICIENCY: >90%
LUMENS PER WATT: 70 LUMENS / WATT
LIGHT OUTPUT: 700 LUMENS
LED COLOR: 3900K SOFT WHITE
CRI: > 80 CRI (80+ PROVIDES A NATURAL RENDITION OF COLOR)
VOLTAGE: 10V-24V AC, 10V-30V DC
DRIVER: SINE WAVE TESTED, SHIELDED TO PREVENT LEAKAGE, SHOCK MOUNTED
FIXTURE MATERIAL: 100% COPPER FREE ALUMINUM - ZL102 Mn102 Mn0.2-0.5, Mg<=0.25, Si<=0.65
GLASS: LOW IRON, HIGH IMPACT, TEMPERED GLASS LENS
GASKET: HONEYCOMB COMPOSITE RUBBER (OIL & SOLVENT RESISTANT)
MOUNTING BRACKET: STAINLESS STEEL 316 A4 (MARINE GRADE)
HARDWARE: STAINLESS STEEL 316 A4 (MARINE GRADE)
FINISH: DOUBLE POWDER COATED GREY (ALSO AVAILABLE WITH WHITE FINISH)
CERTIFICATIONS AND RATINGS:
IP67 (DUST TIGHT AND TEMPORARY IMMERSION)
COMPLY TO UL1993
COMPLY TO CSA 22.2 NO. 1993-09
CE CERTIFICATE NUMBER: B-E09110908
EMC DIRECTIVE 204/108/EC
ADVANTAGES:
90% LOWER POWER CONSUMPTION THAN INCANDESCENT BULBS
NO MAINTENANCE, LIFE TIME > 50,000 HOURS
NOT SENSITIVE TO SHOCK OR VIBRATION
STARTS IMMEDIATELY WITH NO WARM UP OR DELAY
HOUSING DOES NOT GET HOT
ECO FRIENDLY - NO UV, IR, LEAD, MERCURY, AIR POLLUTION
LOW POWER INPUT, HIGH EFFICIENCY OUTPUT
NO NEED TO REPLACE BULBS IN HAZARDOUS LOCATIONS OR CONDITIONS
RELIEF FOR OVERLOADED ONBOARD GENERATORS
APPLICATIONS:
WET LOCATIONS - IDEAL FOR VESSEL DECK AND CARGO HOLD APPLICATIONS
OFFSHORE OIL RIGS
WASTEWATER TREATMENT PLANTS
FERRY, TUG & BARGE
INDUSTRIAL
GREEN LIGHTING APPLICATIONS
WARRANTY: 1 YEAR
SIZE:
HEIGHT: 86MM (3-3/8")
WIDTH: 114.5MM (5-3/4")
DEPTH: 89MM (3-1/2")
WEIGHT: 1.23 LBS.
LED Floodlights operate efficiently and save power but also reduce maintenance and service costs as a result of their long life. Conventional floodlights require frequent lamp replacement and routinely need service during critical work periods. LED Floodlights will help save costs and increase efficiency by ensuring that work will never be stopped due to missing, broken, or burned out bulbs.
Since LED Floodlights are not vibration sensitive nor do they have a light source that requires replacement, an extremely long life cycle is guaranteed. Additionally, LED Floodlights operate at a fraction of the temperature that conventional floodlights do and, therefore, are much safer to work with.
Our Floodlights are manufactured using the newest and most up to date components available. The LED Floodlights use ceramic base and chip technology and drivers are rubber mounted to vibration resistant housings. All fasteners, rings, and nuts, including the bracket, are made of high-quality marine grade A4 316 stainless steel. Floodlights are available in a variety of wattages from 10-80 watts, the halogen equivalent of 50-700 watts.
A special ventilating gland is used in our manufacturing process to ensure that the air pressure inside the LED Floodlight housing will always be the same as the surrounding environment. This prevents fogging on both the inside and outside of the glass due to temperature differences.
The attractive grey or white finish is achieved by using a double powder coat process, which eliminates the potential for corrosion from harsh or saltwater environments. All gaskets are specially designed and manufactured for use in harsh environments, and are saltwater, oil, and lubricant resistant.
The high quality components used in the construction of our LED Floodlights ensures a lifetime of maintenance free performance.
|
|
|
|
