Browser by Category

EMERGENCY LED RETROFIT KIT, HOTSPOT1, 8W, 120V-277VAC, 90 MINUTES, 1000 LUMENS, FULHAM, FHSKITT08LHD

SKU: FHSKITT08LHD
EMERGENCY LED RETROFIT KIT, HOTSPOT1, 8W, 120V-277VAC, 90 MINUTES, 1000 LUMENS, FULHAM, FHSKITT08LHD
Price: $125.49
EMERGENCY LED RETROFIT KIT, HOTSPOT1, 8W, 120V-277VAC, 90 MINUTES, 1000 LUMENS, FULHAM, FHSKITT08LHD
EMERGENCY LED RETROFIT KIT, HOTSPOT1, 8W, 120V-277VAC, 90 MINUTES, 1000 LUMENS, FULHAM, FHSKITT08LHD
Product Details

FHSKITT08LHD

 

MANUFACTURER: FULHAM

 

DESCRIPTION:

EMERGENCY LED LIGHTING RETROFIT KIT FOR FLUORESCENT OR LED FIXTURES, HOTSPOT1, 8 WATT LED ARRAY, 120V-277VAC INPUT VOLTAGE, 1000 LUMENS, 90 MINUTE ILLUMINATION TIME, INCLUDES DRIVER, BATTERY PACK, H STYLE LED ARRAY, ILLUMINATED TEST BUTTON (RED PILOT LIGHT), MOUNTING HARDWARE INCLUDED, UL RATED, ALL FULHAM HOT SPOT 1 PRODUCTS MEET THE APPLICABLE PERFORMANCE AND SAFETY REQUIREMENTS OF UL1598, UL1598C, UL1310 AND UL924

 

NOTE:

THIS UNIT IS VERY EASY TO INSTALL AND FULFILLS THE EMERGENCY LIGHTING REQUIREMENTS FOR MOST APPLICATIONS. WE HAVE FOUND IT PARTICULARLY EFFECTIVE IN TROFFER STYLE LUMINAIRES AND LINEAR FLUORESCENT FIXTURES (SOLD ON THIS WEBSITE). THE FULHAM UNIT IS ALSO IDEAL FOR FLUORESCENT FIXTURES OR FLUORESCENT FIXTURES THAT HAVE BEEN RETROFITTED WITH LED TUBES.

 

SEVERAL SMALL HOLES WILL NEED TO BE DRILLED INTO THE BALLAST TRAY FOR MOUNTING OF THE FULHAM DRIVER, BATTERY PACK AND TEST BUTTON WITH PROVIDED HARDWARE.


THE FULHAM HOTSPOT1 IS NOT INTENDED TO WORK WITH AN ON / OFF WALL SWITCH. THIS IS A STAND ALONE SYSTEM THAT REQUIRES DEDICATED VOLTAGE TO THE CIRCUIT AT ALL TIMES. THIS UNIT IS ONLY INTENDED TO LIGHT DURING AN EMERGENCY POWER OUTAGE OR TEST SITUATION.
 

SPECIFICATIONS

 

ELECTRICAL:

INPUT VOLTAGE: 120V-277VAC +/-10%, 47-63HZ

 

LED ARRAY:

THORO 8 WATT LARGE H CONFIGURATION

 

SURGE PROTECTION:

C62.41 (TVS)

 

OVERCURRENT PROTECTION:

FUSE

 

INPUT CURRENT:

.07A

 

LUMEN OUTPUT:

1000 LUMENS

 

INPUT POWER:

<4W

 

MAXIMUM OUTPUT CURRENT:

2.8 AMP WHEN USED WITH SUPPLIED #FHSBATT3-D3 D CELL BATTERY PACK

 

OUTPUT VOLTAGE:

3.6 VOLT

 

OUTPUT SHORT CIRCUIT PROTECTION:

SELF RESETTING PTC

 

RECHARGE TIME REQUIRED:

24 HOURS

 

BATTERY TYPE:
D CELL NiCd 3.6VDC

 

BATTERY CAPACITY:
4Ah

 

WIRE LENGTH:

BLACK 12 INCHES, WHITE 12 INCHES, BATTERY/LED ARRAY/TEST SWITCH/PILOT LIGHT 24 INCHES

 

ILLUMINATION TIME:

MINIMUM OF 90 MINUTES

 

ESTIMATED RUN TIME:

90 MINUTES

 

RECHARGE TIME REQUIRED:

24 HOURS

 

TEST BUTTON:

ILLUMINATED TEST BUTTON (RED PILOT LIGHT) FOR MONTHLY TESTING OF THE LED ARRAY

 

HARDWARE:

6 PHILLIPS PAN HEAD SELF DRILLING SCREWS 8-18X1/2 INCLUDED WITH KIT

 

AMBIENT TEMPERATURE:

0 DEG C TO 50 DEG C

 

COMPLIANCES:

UL 1310 / CLASS 2 (UL CLASSIFIED LABEL TO BE AFFIXED TO FIXTURE UPON INSTALLATION OF FULHAM KIT)
ALL FULHAM HOT SPOT 1 PRODUCTS MEET THE APPLICABLE PERFORMANCE AND SAFETY REQUIREMENTS OF UL1598, UL1598C, UL1310 AND UL924

 

WARRANTY:

5 YEAR LIMITED WARRANTY FROM DATE OF MANUFACTURE

 

DIMENSIONS:

DRIVER: 5.34" X 1.64"

BATTERY: 5.31" X 2.40"

ARRAY: 5.71" X 3.93"

 

WEIGHT: 1.58 LBS