MFS100
MANUFACTURER: STI MARINE
DESCRIPTION:
MARINE WATERTIGHT FIRESTOP SEALANT, 9.5OZ CAULKING TUBE, RED
UPC NUMBER 730573413104
THIS ADVANCED HYBRID SINGLE COMPONENT POLYMER SEALANT CURES IN THE PRESENCE OF ATMOSPHERIC
MOISTURE AND IS DESIGNED FOR FIRE RATED DIVISIONS. MFS OFFERS BETTER WATER
RESISTANCE THAN CONVENTIONAL SILICONE SEALANTS AND FORMS A TIGHT, DURABLE
ELASTOMERIC SEAL, PREVENTING THE OF AIR, SMOKE AND GASSES.
FOR USE AS A PENETRATION SEAL IN FIRE-RATED BULKHEADS AND DECKS.
PRODUCT FEATURES:
TESTED TO 2010 IMO FTP CODE, ANNEX 1, PART 3 (CLASS A-0 THROUGH A-60 AND
H-0 THROUGH H-120 BULKHEADS AND DECKS)
- FLEXIBLE TO ACCOMMODATE VIBRATION
- RESISTANT TO AGING AND WEATHERING
- NON-CORROSIVE AND NON-CONDUCTIVE
- FAST CURING
- OZONE AND UV RESISTANT
- FOR INTERIOR AND EXTERIOR PENETRATIONS
- EXCELLENT CHEMICAL RESISTANCE PROTECTS IN POLLUTED OR CORROSIVE ENVIRONMENTS
- PROVIDES SUPERIOR SEALING FUNCTION TO PREVENT THE PASSAGE OF FIRE, SMOKE, HOT
GASES, SOUND, CONDITIONED AIR AND WATER
- EASY TO INSTALL AND EASY TO REPAIR, AUTO-BONDING
APPLICATIONS:
BLANK OPENING
CABLES
DUCT
METAL PIPE
MULTIPLE PENETRATIONS
PLASTIC PIPE
INSTALLATION INSTRUCTIONS:
GENERAL NOTES: READ SAFETY DATA SHEETS (SDS) AND PRODUCT LABEL FOR SAFE
HANDLING. FOR FURTHER INFORMATION REGARDING INSTALLATION REQUIREMENTS,
PLEASE REFER TO THE CORRESPONDING TYPE APPROVALS.
STEP 1: ALL SURFACES MUST BE CLEAN, SOUND, DRY, FROST-FREE, AND FREE OF BOND-
BREAKING CONTAMINANTS AND LOOSE MATERIAL
STEP 2: INSTALL BACKING MATERIAL AS REQUIRED
STEP 3: INSTALL MFS SEALANT
STEP 4: SMOOTH SEALANT SERFACE WITH TROWEL OR TOOLING KNIFE BEFORE SKIN FORMS
NOTE: 6MM SPACING NEEDED FOR WATER AND GAS-TIGHTNESS
LIMITATIONS:
THIS PRODUCT HAS BEEN DESIGNED TO BE SAFE WITH PLASTICS. IT HAS BEEN USED EXTENSIVELY
AND SUCCESSFULLY WITH VARIOUS TYPES OF PLASTIC PIPES, TUBES, AND PLASTIC CABLE
INSULATIONS. VARIATIONS IN THESE MATERIALS, HOWEVER, MAKE IT IMPOSSIBLE TO GUARANTEE
COMPATIBILITY. STI STRONGLY RECOMMENDS THAT THE USER CONSULT WITH THE PIPE,
TUBING, OR CABLE MANUFACTURER IN QUESTION REGARDING ANY KNOWN SENSITIVITIES OR
POTENTIAL RESTRICTIONS BEFORE APPLYING THIS PRODUCT.
MAINTENANCE:
THIS PRODUCT IS MAINTENANCE FREE. OBSERVED DAMAGE CAN BE REPAIRED WITH MFS
SEALANT PER THE ORIGINAL APPROVED DESIGN.
PHYSICAL PROPERTIES – AS SUPPLIED:
CONSISTENCY: PASTE
PERCENT SOLIDS: >99.0%
VOC (ASTM D2369): 11 G/L (<2%)
TOOLING TIME: 15 – 20 MINUTES
TACK FREE: 2 – 3 HOURS
(ASTM C679 @ 77DEG F / 50%RH)
STORAGE TEMP: 4DEG C (40DEG F) TO 35DEG C (95DEG F)
APPLICATION TEMP: 4DEG C (40DEG F) TO 65DEG C (149DEG F)
SHELF LIFE: 18 MONTHS
DENSITY: 1.5KG/L (12.5 LBS/GAL)
VISCOSITY: 400,000 – 600,000 CPS
PHYSICAL PROPERTIES – CURED:
COLOR: RED
IN SERVICE TEMP: -40DEG C (-40DEG F) TO 93DEG C (200DEG F)
MOVEMENT: 25%
FLAME SPREAD: <25
SMOKE DEVELOPMENT: <50
ACCELERTED AGE >20 YEARS
TESTING TO ASTM E1641 & ASTM E1877
THIRD PARTY APPROVALS:
DNV
ABS – AMERICAN BUREAU OF SHIPPING
BUREAU VERITAS
US COAST GUARD
MADE IN THE USA
SIZE:
9-1/8IN TALL (WITHOUT CAULK APPLICATION TIP)
1-15/16IN WIDE
WEIGHT:
1.16 LBS (.53 KG) EACH
